EN-FAB, Inc. has been in the Steam Flood business for over twenty years, and has designed and fabricated water treatment equipment using river water, sea water, produced water, and well water for high pressure steam generators, it was a logical step to move into the water flood business where similar equipment is also used.

EN-FAB, Inc. can design and fabricate a Water Flood System using seawater.  Typically such a system will consist of a Coarse Filter (to remove debris), a Deep Bed Multimedia Filter (to remove suspended solids), Disposable Cartridge Filters (to remove particles above a certain micron size e.g. 1-2 microns), a Vacuum Tower (to remove dissolved gasses, particularly oxygen), Chemical feeds, such as polyelectrolyte for coagulation (for the filters), chlorine to kill bugs etc. in the water, scale inhibitor to prevent scaling, corrosion inhibitor to prevent corrosion, etc.

EN-FAB, Inc. can also design and fabricate Water Flood systems using produced water.  Generally the system will consist of Separators, (to remove the bulk of suspended solids), Gas Flotation units (to remove oil to an acceptable level for filtration), Multimedia Filters (to remove remaining suspended solids to about 2 ppm), Cartridge Filters (to remove particles larger than 2 microns), Vacuum Towers to remove dissolved gasses, particularly oxygen), Chemical Feeds, etc.

EN-FAB, Inc. can design and fabricate Water Flood Systems using river water.  This system generally consists of a Clarifier, Multimedia Filter, Cartridge Filters for removing particles 2 microns and larger, Chemical Feeds, etc.

EN-FAB, Inc. engineering staff is capable to design the entire water flood system from the customer specifications.