To improve production from deeper oil wells, water is often injected into the reservoir.
This water must be treated before and after usage for this type of Enhanced Oil Recovery.
This total water supply system is called a Water Flood Package. This Water Flood Package
could include any or all of the water flood products built by EN-FAB, Inc.
EN-FAB, Inc. has been in the Steam Flood business for over twenty years, and has designed
and fabricated water treatment equipment using river water, sea water, produced water,
and well water for high pressure steam generators, it was a logical step to move into the
water flood business where similar equipment is also used.
EN-FAB, Inc. can design and fabricate a Water Flood System using seawater. Typically
such a system will consist of a Coarse Filter (to remove debris), a Deep Bed Multimedia Filter
(to remove suspended solids), Disposable Cartridge Filters (to remove particles above a certain
micron size e.g. 1-2 microns), a Vacuum Tower (to remove dissolved gasses, particularly oxygen),
Chemical feeds, such as polyelectrolyte for coagulation (for the filters), chlorine to kill
bugs etc. in the water, scale inhibitor to prevent scaling, corrosion inhibitor to prevent
EN-FAB, Inc. can also design and fabricate Water Flood systems using produced water.
Generally the system will consist of Separators, (to remove the bulk of suspended solids),
Gas Flotation units (to remove oil to an acceptable level for filtration), Multimedia Filters
(to remove remaining suspended solids to about 2 ppm), Cartridge Filters (to remove particles
larger than 2 microns), Vacuum Towers to remove dissolved gasses, particularly oxygen),
Chemical Feeds, etc
EN-FAB, Inc. can design and fabricate Water Flood Systems using river water. This system
generally consists of a Clarifier, Multimedia Filter, Cartridge Filters for removing particles
2 microns and larger, Chemical Feeds, etc.
EN-FAB, Inc. engineering staff is capable to design the entire water flood system from
the customer specifications.